Minimalist IAS
Sign upसाइन अप
Science & technology

Prelims · Science & technology · 41 questions

Physics & chemistry in everyday life

Every UPSC Prelims question on this topic, 2011–2026, newest first. Tap an option to check yourself; the answer and explanation open below it.

Physics & chemistry in everyday life questions per year: 2011: 2, 2012: 4, 2013: 5, 2014: 1, 2015: 1, 2016: 0, 2017: 2, 2018: 1, 2019: 0, 2020: 1, 2021: 4, 2022: 0, 2023: 1, 2024: 1, 2025: 2, 2026: 1 Asked in 13 of 16 years · last in 2026 · most in 2013 (5)

Practising Science & technology? Take it as timed sets of 25 →

UPSC syllabus: “General Science.” Sub-topics in the detailed syllabus →

Showing 31–41 of 41, newest first.

Prelims 2013

Medium

Consider the following phenomena:

  1. 1.Size of the sun at dusk
  2. 2.Colour of the sun at dawn
  3. 3.Moon being visible at dawn
  4. 4.Twinkle of stars in the sky
  5. 5.Polestar being visible in the sky

Which of the above are optical illusions?

Answer & explanation

Answer: (c) 1, 2 and 4

Phenomena 1, 2 and 4 are apparent effects: what we see differs from the real object, because of the atmosphere or the way the brain judges size. The Moon at dawn and the Pole Star are real objects that are actually there to be seen, so 3 and 5 are not illusions.

  • ✓ 1. The Sun's disc is no bigger near the horizon than high in the sky; it only looks bigger. Photographs prove the Moon is the same width near the horizon as when it is high up, yet our eyes see it as larger. The same horizon illusion makes the setting Sun look bigger.
  • ✓ 2. The Sun looks red or orange at dawn because its light travels a long path through the air and is scattered. The Sun's real colour does not change, only its appearance.
  • ✗ 3. At certain phases the Moon is really above the horizon at dawn and can be seen. This is a real sighting, not a false appearance.
  • ✓ 4. Twinkling is caused by atmospheric refraction of starlight. As the light passes through moving layers of air it is bent unevenly, so the star's apparent position and brightness keep changing, though the star itself is not flickering.
  • ✗ 5. Polaris is a real star that stays nearly fixed in the northern sky, so it is actually seen from the northern hemisphere. Nothing about its appearance is false.

Remember · The Sun's apparent size and colour at the horizon and the twinkling of stars are appearances caused by perception and the atmosphere. Seeing the Moon or the Pole Star is plain visibility.

📘 Read it in NCERT: Class 10 Science, Ch 10 (practise this chapter) · Class 10 Science, Ch 10 (practise this chapter)

Sources

Question: UPSC Civil Services (Preliminary) 2013, General Studies Paper I. Explanation: Minimalist IAS, checked 25 Oct 2026 (how we verify). Permalink ·

The efforts to detect the existence of Higgs boson particle have become frequent news in the recent past. What is/are the importance/importances of discovering this particle?

  1. 1.It will enable us to understand as to why elementary particles have mass.
  2. 2.It will enable us in the near future to develop the technology of transferring matter from one point to another without traversing the physical space between them.
  3. 3.It will enable us to create better fuels for nuclear fission.

Select the correct answer using the codes given below:

Answer & explanation

Answer: (a) 1 only

The Higgs boson is the particle linked to the Higgs field, which gives mass to elementary particles. Finding it confirmed the theory of how particles get mass. It has no link to teleportation or to fuels for nuclear fission. Only statement 1 is correct, so the answer is (a).

  • ✓ 1. Elementary particles gain mass by interacting with the Higgs field. The Higgs boson is an excitation of that field, so its discovery confirmed this mass-giving mechanism. The 2013 Nobel Prize in Physics honoured the theory of this mechanism, which was confirmed through the discovery of the predicted particle.
  • ✗ 2. Moving matter from one point to another without crossing the space between them (teleportation) has nothing to do with the Higgs boson. The discovery explains the origin of mass and offers no such technology.
  • ✗ 3. Fission fuels such as uranium-235 and plutonium-239 are used because their nuclei can be split to release energy. The Higgs boson concerns the origin of mass of elementary particles and does not lead to better fission fuels.

Remember · The Higgs boson (discovery announced at CERN's LHC on 4 July 2012) confirms the Higgs field, which gives elementary particles their mass. It has no practical link to teleportation or nuclear fuels.

Sources

  • CERN – The Higgs boson ↗ · reference work “The Higgs field was proposed in 1964 as a new kind of field that fills the entire Universe and gives mass to all elementary particles.”
  • The Nobel Prize in Physics 2013 – Press release ↗ “for the theoretical discovery of a mechanism that contributes to our understanding of the origin of mass of subatomic particles, and which recently was confirmed through the discovery of the predicted fundamental particle”

Question: UPSC Civil Services (Preliminary) 2013, General Studies Paper I. Explanation: Minimalist IAS, checked 25 Oct 2026 (how we verify). Permalink ·

Ball bearings are used in bicycles, cars, etc., because –

Answer & explanation

Answer: (c) the effective area of contact between the wheel and axle is reduced

Ball bearings place small hard balls between the wheel (hub) and the axle, so the surfaces roll over each other instead of sliding. The balls touch the surfaces only at tiny points, so the effective area of contact is reduced. Friction falls and the parts wear out more slowly.

  • ✓ (c) Rolling balls touch the surfaces only at tiny points, so the effective area of contact is reduced. The frictional resistance of sliding is largely replaced by the much smaller resistance of rolling.
  • ✗ (b) Ball bearings are fitted to cut friction and wear. Increasing the effective contact area is the opposite of what they do.
  • ✗ (a) The balls do not enlarge the contact between wheel and axle. They change sliding into rolling, which lowers resistance.
  • ✗ (d) Option (c) correctly states the reason, so this option is wrong.

Remember · Ball bearings replace sliding with rolling. The balls touch only at small points, which reduces the effective contact area and friction. This is why they are used in cycles, fans and vehicles.

Sources

Question: UPSC Civil Services (Preliminary) 2013, General Studies Paper I. Explanation: Minimalist IAS, checked 25 Oct 2026 (how we verify). Permalink ·

Rainbow is produced when sunlight falls on drops of rain. Which of the following physical phenomena are responsible for this?

  1. 1.Dispersion
  2. 2.Refraction
  3. 3.Internal reflection

Select the correct answer using the codes given below:

Answer & explanation

Answer: (d) 1, 2 and 3

Each raindrop works like a tiny prism. Sunlight refracts as it enters the drop and splits into colours (dispersion). It then reflects off the back of the drop (internal reflection) and refracts again as it leaves. All three phenomena are involved.

  • ✓ 1. Different colours bend by different amounts inside the drop, so white sunlight splits into its component colours. This splitting is dispersion.
  • ✓ 2. Light is refracted when it enters the raindrop and refracted again when it leaves.
  • ✓ 3. Between the two refractions, the dispersed light reflects from the inner back surface of the drop. This sends it back towards the observer.
  • ✗ (a) It leaves out internal reflection, which turns the light back towards the observer.
  • ✗ (b) It leaves out dispersion, which produces the colours.
  • ✗ (c) It leaves out refraction, which bends the light at both surfaces of the drop.

Remember · Rainbow = refraction + dispersion + internal reflection (then refraction again) in raindrops. It always forms opposite to the Sun.

📘 Read it in NCERT: Class 10 Science, Ch 10 (practise this chapter)

Sources

  • NCERT Class 10 · Science, Chapter 10 “The water droplets act like small prisms. They refract and disperse the incident sunlight, then reflect it internally, and finally refract it again when it comes out of the raindrop”

Question: UPSC Civil Services (Preliminary) 2013, General Studies Paper I. Explanation: Minimalist IAS, checked 25 Oct 2026 (how we verify). Permalink ·

The known forces of nature can be divided into four classes, viz., gravity, electromagnetism, weak nuclear force and strong nuclear force. With reference to them, which one of the following statements is not correct?

Answer & explanation

Answer: (a) Gravity is the strongest of the four

Gravity is the weakest of the four fundamental forces, not the strongest; the strong nuclear force is the strongest. So statement (a) is the incorrect one.

  • ✓ (a) This statement is wrong, so it is the answer. The strong force is the strongest of the four fundamental interactions. Gravity is the weakest, although its range is infinite.
  • ✗ (b) This statement is true, so it is not the answer. Electromagnetism is the force that acts between electrically charged particles. It covers both electricity and magnetism.
  • ✗ (c) This statement is true, so it is not the answer. The weak force can turn a down quark into an up quark, changing a neutron into a proton. This process occurs in radioactive decay, when atoms spontaneously shed energy and subatomic particles.
  • ✗ (d) This statement is true, so it is not the answer. At the level of the atomic nucleus, the strong force holds protons and neutrons together.

Remember · Order of strength: strong > electromagnetic > weak > gravity. Gravity is the weakest but has infinite range. The weak force drives radioactive (beta) decay, and the strong force binds the nucleus.

Sources

  • CERN – The Standard Model ↗ · reference work “The strong force, as the name suggests, is the strongest of all four fundamental interactions.”
  • NASA Science – The Four Fundamental Forces ↗ “At the level of an atomic nucleus, the strong force holds together the protons and neutrons that form the essence of the elements. … This type of action also occurs in radioactive decay, which happens when atoms spontaneously shed energy and subatomic particles.”

Question: UPSC Civil Services (Preliminary) 2013, General Studies Paper I. Explanation: Minimalist IAS, checked 25 Oct 2026 (how we verify). Permalink ·

What is the role of ultraviolet (UV) radiation in the water purification systems?

  1. 1.It inactivates/kills the harmful microorganisms in water.
  2. 2.It removes all the undesirable odours from the water.
  3. 3.It quickens the sedimentation of solid particles, removes turbidity and improves the clarity of water.

Which of the statements given above is/are correct?

Answer & explanation

Answer: (a) 1 only

UV radiation is a disinfectant. It damages the genetic material of microbes so they cannot multiply or infect. It is a purely physical treatment. It does not remove odours, and it does not settle or filter out particles. The water must already be clear for UV to work well. Only statement 1 is correct.

  • ✓ 1. UV light disinfects water by inactivating harmful microorganisms such as bacteria, protozoa and viruses. This is the main reason UV units are fitted in water purifiers.
  • ✗ 2. UV only inactivates microbes. Taste- and odour-causing compounds need other treatment, such as oxidation with chemical agents or activated carbon. The word 'all' also makes the claim too strong.
  • ✗ 3. UV does not cause sedimentation or remove turbidity. Turbid water actually reduces UV efficiency, because particles shield microbes from the light. So water is filtered or settled before the UV stage.
  • ✗ (c) This option is tempting because statement 1 is right. But statement 3 confuses disinfection with clarification (coagulation, sedimentation and filtration).

Remember · UV is only a disinfectant: it inactivates microbes and leaves no residual effect. It cannot remove turbidity, odour or dissolved impurities, so clear, pre-filtered water is needed.

Sources

Question: UPSC Civil Services (Preliminary) 2012, General Studies Paper I. Explanation: Minimalist IAS, checked 25 Oct 2026 (how we verify). Permalink ·

A team of scientists at Brookhaven National Laboratory including those from India created the heaviest anti-matter (anti-helium nucleus). What is/ are the implication/ implications of the creation of Anti-matter?

  1. 1.It will make mineral prospecting and oil exploration easier and cheaper.
  2. 2.It will help probe the possibility of the existence of stars and galaxies made of anti-matter.
  3. 3.It will help understand the evolution of the universe.

Select the correct answer using the codes given below:

Answer & explanation

Answer: (b) 2 and 3 only

Answer (b): 2 and 3 only. Anti-helium-4 was made by the STAR experiment at Brookhaven's RHIC collider. Its value lies in basic physics: it helps the search for antimatter stars and galaxies, and the study of why the universe is made of matter. It has no use in mineral or oil exploration.

  • ✗ 1. Creating anti-helium nuclei in a particle collider is fundamental research into matter and antimatter. Such fleeting antinuclei have no application in prospecting for minerals or oil.
  • ✓ 2. Producing anti-helium-4 in the laboratory informs space searches such as the AMS experiment. A detection of antihelium-4 in space could indicate large quantities of antimatter segregated from matter, such as antimatter stars or galaxies.
  • ✓ 3. Matter and antimatter are understood to have been created in equal amounts at the Big Bang, yet the universe appears to be made entirely of matter. RHIC's collisions recreate conditions of the early universe, so antimatter studies there help in understanding how the universe evolved.

Remember · Antimatter research, such as anti-helium-4 at RHIC (Brookhaven, 2011), bears on cosmology: the matter–antimatter imbalance and the search for antimatter in space. It has no use in mineral or oil exploration.

Sources

  • Brookhaven National Laboratory: RHIC Physicists Nab New Record for Heaviest Antimatter ↗ “One of the great mysteries of physics is why our universe appears to be made entirely of ordinary matter when matter and antimatter are understood to have been created in equal amounts at the time of the Big Bang. … An observation of antihelium-4 by the AMS experiment could indicate the existence of large quantities of antimatter somehow segregated from the matter in our universe”

Question: UPSC Civil Services (Preliminary) 2012, General Studies Paper I. Explanation: Minimalist IAS, checked 25 Oct 2026 (how we verify). Permalink ·

Graphene has been frequently in the news recently. What is its importance?

  1. 1.It is a two-dimensional material and has good electrical conductivity.
  2. 2.It is one of the thinnest but strongest materials tested so far.
  3. 3.It is entirely made of silicon and has high optical transparency.
  4. 4.It can be used as 'conducting electrodes' required for touch screens, LCDs and organic LEDs.

Which of the statements given above are correct?

Answer & explanation

Answer: (c) 1, 2 and 4 only

Graphene is a single atomic layer of carbon, so it is a two-dimensional material. It is extremely thin, very strong and conducts electricity well. Because it is also a transparent conductor, it can serve as a transparent electrode in touch screens and displays. Statement 3 fails because graphene is made of carbon, not silicon. The answer is (c).

  • ✓ 1. Graphene is a sheet of carbon only one atom thick, which makes it a two-dimensional material. As a conductor of electricity it performs as well as copper.
  • ✓ 2. The Nobel Prize in Physics 2010 press release describes graphene as not only the thinnest material ever but also the strongest.
  • ✗ 3. Graphene is a form of carbon, not silicon. It is nearly transparent, but the claim that it is 'entirely made of silicon' makes the statement wrong.
  • ✓ 4. Graphene is a transparent conductor, so it can be used in touch screens, light panels and solar cells. There it can replace the fragile and expensive Indium-Tin-Oxide (ITO). ITO is also the standard transparent conducting electrode in LCDs and organic LEDs, so graphene can serve as the conducting electrode for these devices too.

Remember · Graphene is a one-atom-thick sheet of carbon (not silicon) arranged in a honeycomb lattice. It is the thinnest and strongest material tested so far, conducts electricity well and is almost transparent. Geim and Novoselov won the 2010 Physics Nobel for work on it.

Sources

Question: UPSC Civil Services (Preliminary) 2012, General Studies Paper I. Explanation: Minimalist IAS, checked 25 Oct 2026 (how we verify). Permalink ·

Prelims 2012

Medium

Consider the following statements:

If there were no phenomenon of capillarity

  1. 1.it would be difficult to use a kerosene lamp
  2. 2.one would not be able to use a straw to consume a soft drink
  3. 3.the blotting paper would fail to function
  4. 4.the big trees that we see around would not have grown on the Earth

Which of the statements given above are correct?

Answer & explanation

Answer: (b) 1, 3 and 4 only

Capillarity is the rise of a liquid through narrow spaces such as fibres, wicks and fine tubes. It feeds the kerosene lamp wick, makes blotting paper absorb ink, and aids the rise of water in plants. A straw works differently: sucking lowers the pressure inside it, and atmospheric pressure on the drink's surface pushes the liquid up. So statements 1, 3 and 4 are correct.

  • ✓ 1. Kerosene climbs the cotton wick through the tiny gaps between its fibres by capillary rise. Without capillarity the flame would get no fuel.
  • ✗ 2. A straw works by suction. Sucking lowers the pressure inside the straw, and atmospheric pressure on the drink's surface pushes the liquid up. This would work even if capillarity did not exist.
  • ✓ 3. Blotting paper is a mass of fine pores between fibres. Ink is drawn into these pores by capillary action. Without capillarity it would not absorb.
  • ✓ 4. Water rises to the top of trees through very narrow xylem vessels. Transpiration creates a pull in the xylem. The water column can be pulled up unbroken only because water molecules cling to the vessel walls (adhesion) and to each other (cohesion). These are the same forces behind capillarity. Without them, water could not reach the crowns of tall trees.

Remember · Capillarity explains wicks, blotting paper, soil moisture and water rise in plants. Drinking through a straw is atmospheric pressure at work, not capillarity.

📘 Read it in NCERT: Class 11 Fundamentals of Physical Geography, Ch 5 (practise this chapter) · Class 9 Exploration, Ch 3 (practise this chapter)

Sources

Question: UPSC Civil Services (Preliminary) 2012, General Studies Paper I. Explanation: Minimalist IAS, checked 25 Oct 2026 (how we verify). Permalink ·

The surface of a lake is frozen in severe winter, but the water at its bottom is still liquid. What is the reason?

Answer & explanation

Answer: (c) The density of water is maximum at 4°C

Water is densest at 4 °C, not at 0 °C. As a lake cools in winter, the 4 °C water sinks and stays at the bottom. Colder water, which is lighter, stays on top and freezes first. The lake therefore freezes from the top down, and the bottom stays liquid.

  • ✓ (c) Water's density peaks at 4 °C. Surface water that cools below 4 °C becomes lighter and stays on top, so the 4 °C water settles at the bottom. Ice (at 0 °C) is lighter still and forms a layer on the surface.
  • ✗ (a) Ice does conduct heat poorly, and the ice layer insulates the water beneath it. But this only slows further freezing once ice has formed on top. Why the ice forms on top, with the denser 4 °C water at the bottom, comes from water being densest at 4 °C, so this is not the reason asked for.
  • ✗ (b) The lake loses heat continuously to the colder winter air. The surface freezes because heat is lost, not because none is lost.
  • ✗ (d) Statement (c) is correct, so 'none of the above' cannot be right.

Remember · Water is densest at 4 °C. Ice floats and the 4 °C water sinks, so lakes freeze from the top down and aquatic life survives below the ice.

📘 Read it in NCERT: Class 8 Curiosity, Ch 9 (practise this chapter)

Sources

  • NCERT Class 8 · Curiosity, Chapter 9 “Water has a special property that its density is highest at 4 °C. As the temperature drops, and water turns into ice at 0 °C, it undergoes a change in structure”

Question: UPSC Civil Services (Preliminary) 2011, General Studies Paper I. Explanation: Minimalist IAS, checked 25 Oct 2026 (how we verify). Permalink ·

What is the difference between a CFL and an LED lamp?

  1. 1.To produce light, a CFL uses mercury vapour and phosphor while an LED lamp uses semiconductor material.
  2. 2.The average lifespan of a CFL is much longer than that of an LED lamp.
  3. 3.A CFL is less energy-efficient as compared to an LED lamp.

Which of the statements given above is/are correct?

Answer & explanation

Answer: (c) 1 and 3 only

Statements 1 and 3 are correct. A CFL is a fluorescent lamp: mercury vapour gives off ultraviolet light, and a phosphor coating turns it into visible light. An LED makes light in a semiconductor chip. For the same light, an LED uses about half the power of a CFL and lasts several times longer, so statement 2 is wrong.

  • ✓ 1. In a CFL, an electric discharge excites mercury vapour, and the phosphor coating inside the tube converts the resulting ultraviolet radiation into visible light. An LED produces light directly inside a semiconductor chip, with no gas or mercury.
  • ✗ 2. The US Department of Energy puts a typical CFL at 8,000 to 10,000 hours. LED lamps last several times longer than that. So an LED outlasts a CFL, not the other way round.
  • ✓ 3. A 7W LED bulb gives the same light as a 14W CFL, a saving of about 50% energy compared with the CFL. A CFL is therefore less energy-efficient than an LED.

Remember · Compared with a CFL, an LED lamp is a semiconductor device that uses about half the power for the same light and lasts several times longer. A CFL uses mercury vapour and phosphor.

Sources

Question: UPSC Civil Services (Preliminary) 2011, General Studies Paper I. Explanation: Minimalist IAS, checked 25 Oct 2026 (how we verify). Permalink ·

The Syllabus X-Ray of this topic

1 of its 5 sub-topics is Core

1 Core · 1 High · 1 Steady · 2 Rare

  • Core #46Everyday physics: light, sound, heat & electricity · 7 questions
  • HighEveryday chemistry: materials & reactions · 5 questions

The X-Ray ranks all 928 sub-topics of the UPSC syllabus by what UPSC has asked since 2016. The 60 Prelims Core sub-topics are behind 51% of Prelims questions.

See the whole X-Ray →

The same topic in Mains

Read it in NCERT

Free · Daily Updates Join Minimalist IAS on Telegram or WhatsApp One PYQ with its answer every morning, plus the Daily Brief and the Sunday quiz. Free, no sign-up. Join Telegram Join on WhatsApp →