Minimalist IAS
Sign upसाइन अप
Science & technology

Prelims · Science & technology · 41 questions

Physics & chemistry in everyday life

Every UPSC Prelims question on this topic, 2011–2026, newest first. Tap an option to check yourself; the answer and explanation open below it.

Physics & chemistry in everyday life questions per year: 2011: 2, 2012: 4, 2013: 5, 2014: 1, 2015: 1, 2016: 0, 2017: 2, 2018: 1, 2019: 0, 2020: 1, 2021: 4, 2022: 0, 2023: 1, 2024: 1, 2025: 2, 2026: 1 Asked in 13 of 16 years · last in 2026 · most in 2013 (5)

Practising Science & technology? Take it as timed sets of 25 →

UPSC syllabus: “General Science.” Sub-topics in the detailed syllabus →

The surface of a lake is frozen in severe winter, but the water at its bottom is still liquid. What is the reason?

Answer & explanation

Answer: (c) The density of water is maximum at 4°C

Water is densest at 4 °C, not at 0 °C. As a lake cools in winter, the 4 °C water sinks and stays at the bottom. Colder water, which is lighter, stays on top and freezes first. The lake therefore freezes from the top down, and the bottom stays liquid.

  • ✓ (c) Water's density peaks at 4 °C. Surface water that cools below 4 °C becomes lighter and stays on top, so the 4 °C water settles at the bottom. Ice (at 0 °C) is lighter still and forms a layer on the surface.
  • ✗ (a) Ice does conduct heat poorly, and the ice layer insulates the water beneath it. But this only slows further freezing once ice has formed on top. Why the ice forms on top, with the denser 4 °C water at the bottom, comes from water being densest at 4 °C, so this is not the reason asked for.
  • ✗ (b) The lake loses heat continuously to the colder winter air. The surface freezes because heat is lost, not because none is lost.
  • ✗ (d) Statement (c) is correct, so 'none of the above' cannot be right.

Remember · Water is densest at 4 °C. Ice floats and the 4 °C water sinks, so lakes freeze from the top down and aquatic life survives below the ice.

📘 Read it in NCERT: Class 8 Curiosity, Ch 9 (practise this chapter)

Sources

  • NCERT Class 8 · Curiosity, Chapter 9 “Water has a special property that its density is highest at 4 °C. As the temperature drops, and water turns into ice at 0 °C, it undergoes a change in structure”

Question: UPSC Civil Services (Preliminary) 2011, General Studies Paper I. Explanation: Minimalist IAS, checked 25 Oct 2026 (how we verify). Permalink ·

What is the difference between a CFL and an LED lamp?

  1. 1.To produce light, a CFL uses mercury vapour and phosphor while an LED lamp uses semiconductor material.
  2. 2.The average lifespan of a CFL is much longer than that of an LED lamp.
  3. 3.A CFL is less energy-efficient as compared to an LED lamp.

Which of the statements given above is/are correct?

Answer & explanation

Answer: (c) 1 and 3 only

Statements 1 and 3 are correct. A CFL is a fluorescent lamp: mercury vapour gives off ultraviolet light, and a phosphor coating turns it into visible light. An LED makes light in a semiconductor chip. For the same light, an LED uses about half the power of a CFL and lasts several times longer, so statement 2 is wrong.

  • ✓ 1. In a CFL, an electric discharge excites mercury vapour, and the phosphor coating inside the tube converts the resulting ultraviolet radiation into visible light. An LED produces light directly inside a semiconductor chip, with no gas or mercury.
  • ✗ 2. The US Department of Energy puts a typical CFL at 8,000 to 10,000 hours. LED lamps last several times longer than that. So an LED outlasts a CFL, not the other way round.
  • ✓ 3. A 7W LED bulb gives the same light as a 14W CFL, a saving of about 50% energy compared with the CFL. A CFL is therefore less energy-efficient than an LED.

Remember · Compared with a CFL, an LED lamp is a semiconductor device that uses about half the power for the same light and lasts several times longer. A CFL uses mercury vapour and phosphor.

Sources

Question: UPSC Civil Services (Preliminary) 2011, General Studies Paper I. Explanation: Minimalist IAS, checked 25 Oct 2026 (how we verify). Permalink ·

The Syllabus X-Ray of this topic

1 of its 5 sub-topics is Core

1 Core · 1 High · 1 Steady · 2 Rare

  • Core #46Everyday physics: light, sound, heat & electricity · 7 questions
  • HighEveryday chemistry: materials & reactions · 5 questions

The X-Ray ranks all 928 sub-topics of the UPSC syllabus by what UPSC has asked since 2016. The 60 Prelims Core sub-topics are behind 51% of Prelims questions.

See the whole X-Ray →

The same topic in Mains

Read it in NCERT

निःशुल्क · रोज़ सुबह Minimalist IAS से Telegram या WhatsApp पर जुड़ें हर सुबह उत्तर सहित एक PYQ, डेली ब्रीफ़ और रविवार की क्विज़, सीधे आपके फ़ोन पर। निःशुल्क, बिना साइन-अप (पोस्ट अंग्रेज़ी में)। Telegram पर जुड़ें WhatsApp पर जुड़ें →